Swiss Federal Statistics Geodata (GEOSTAT)
Population, buildings, dwellings, persons
Developed from 1850 onwards and fundamentally re-designed in 2010, the Swiss system of population censuses is the data source of all published geodata on population, households, buildings and dwellings at the geographical resolution of one hectare (surface area of 100x100 m).
A population census was conducted by paper questionnaire every ten years from 1850 to 2000, for the whole population of Switzerland. The results enabled a description of the demographic, spatial, social and economic development of the country. From 1970 geocoding of the questionnaires or the recorded buildings took place. This was done initially on a voluntary basis (1970 and 1980) and from 1990 became compulsory and on a nationwide basis.
The new population census system based on data from the population and building and dwellings registers, provides since 2010 annually updated, diverse statistical information on buildings, dwellings, households and persons. As before, selected characteristics from the extensive data stock are analysed at hectare resolution and transformed into geodata, which is then made available.
Population and households from 2010 onwards
On the basis of data from the population and building and dwellings registers, the new population census system provides since 2010 diverse statistical information on households, persons, buildings and dwellings. Selected characteristics from the extensive data stock are analysed at hectare resolution and transformed into geodata, which is then made available.
In GEOSTAT's standard range of data based on the Population and Household Statistics (STATPOP) 69 individual variables and 8 household variables (since 2012) aggregated by hectare are available.
Geodata
Buildings and dwellings from 2010 onwards
On the basis of data from the population and building and dwellings registers, the new population census system provides since 2010 diverse statistical information on buildings, dwellings, households and persons. Selected characteristics from the extensive data stock are analysed at hectare resolution and transformed into geodata, which is then made available.
In GEOSTAT's standard range of data based on the Buildings and Dwellings Statistics (BDS) some 140 building and dwelling variables aggregated by hectare are available.
Geodata
Population and buildings censuses 1970, 1980, 1990, 2000
A population census was conducted by paper questionnaire every ten years from 1850 to 2000, for the whole population of Switzerland. The results enabled a description of the demographic, spatial, social and economic development of the country. From 1970 geocoding of the questionnaires or the recorded buildings took place. This was done initially on a voluntary basis (1970 and 1980) and from 1990 became compulsory and on a nationwide basis.
Population, buildings and dwellings census 1990 and 2000
For all residential buildings identified in the National Census 2000 centroid coordinates were determined. 250 variables on population and households as well as 345 variables (auto-completed) respectively 415 variables (with missing values; see Restrictions for data dissemination and utilisation below) on buildings and dwellings have been aggregated to hectares for GEOSTAT's standard range of data.
For all residential buildings identified in the National Census 1990 centroid coordinates were determined. 160 variables on population and households and 229 variables on buildings and dwellings have been aggregated to hectares for GEOSTAT's standard range of data.
For each hectare, the coordinates of the south-west corner (bottom left) are used as an identifier. Every characteristic or numeric value shown for each cell relates to occurrences within the 100x100 m surface of this cell, i.e. the number of buildings, for example, whose central coordinates are found in the square in question. In this way they build an aggregation of the individual records from a survey that are allocated to each grid cell or hectare.
Population, buildings and dwellings census 1970 and 1980
In 1970 and 1980, the Swiss communes could voluntarily participate in geocoding the buildings belonging to their territory. As a result, the geodata of theses censuses only provide information for a part of the Swiss communes representing approximately one third of the Swiss population.
A restricted selection of attributes was analyzed by hectare and are included in the available data sets. These include for both surveys the residential and working population, as well as the occupied dwellings.
Coverage and attributes
Number of communes with geocoding: 750 (1970) resp. 620 (1980)
Number of available attributes at hectare resolution: 8 (1970) resp. 54 (1980)
Due to the incomplete coverage and the poor differenciation of attributes, geodata from these surveys are not much demanded anymore in recent years. They are therefore presently only available on special demand.
Education
The “Educational attainment – Geodata” product provides detailed information on the highest level of education completed by the permanent resident population aged 25 to 64 across Switzerland. This data is based on several statistical surveys conducted by the federal administration and is supplemented by a two-stage imputation model that estimates missing data. The level of education is reported according to a three-stage nomenclature: compulsory schooling, secondary level II, and tertiary level. Data is available for the reference years 1990 and 2000, as well as for each year from 2017 onwards. It is provided for all of Switzerland at three spatial resolutions: hectares (100 x 100 m grid), first-level spatial statistical units (USPAT1 regions), and municipalities.
Business and Employment
Developed from 1905 onwards and fundamentally re-designed in 2011, the Swiss system of structural business surveys is the data source of all published geodata on business establishments and occupation at the geographical resolution of one hectare (surface area of 100x100 m).
From 1905 to 2008, sporadic business censuses were carried out by questionnaire among secondary and tertiary sector businesses and in the agricultural sector. In these censuses, the economic production units were recorded as a reference for many other statistics from an economic, social and spatial point of view. From 1995, all establishments were geocoded, thus laying the foundations for an analysis of hectare data.
Since 2011, the structural business statistics (STATENT) provides comprehensive information that is updated every year on the structure of the Swiss economy on the basis of register data (mainly the AHV/AVS register and the FSO business and enterprise register) as well as data from the business surveys. Selected variables from the extensive data stock are analysed at hectare resolution and transformed into geodata, which is then made available.
Structural business statistics (STATENT) from 2011 onwards
The structural business statistics (STATENT) provides comprehensive information that is updated every year on the structure of the Swiss economy on the basis of register data (mainly the AHV/AVS register and the FSO business and enterprise register) as well as data from the business surveys. STATENT has replaced the Business Census, which was conducted for the last time in 2008. Selected variables from the extensive data stock are analysed at hectare resolution and transformed into geodata, which is then made available.
Geodata
Swiss Federal Business Census 1995–2008
From 1905 to 2008, sporadic business censuses were carried out by questionnaire among secondary and tertiary sector businesses and in the agricultural sector. In these censuses, the economic production units were recorded as a reference for many other statistics from an economic, social and spatial point of view. From 1995, all establishments were geocoded, thus laying the foundations for an analysis of hectare data.
Federal business census 2008
In the BC 2008 the geodata from the three economic sectors were disseminated in combined files for the first time. The previous, separate processing and presentation of agriculture, forestry, hunting, fishing and fish farming as well as of industry and services was abandoned.
Most data for the primary sector were collected through coordination of administrative data in the context of the Direct Payments Ordinance. Secondary and tertiary sector data was collected either by means of paper questionnaires, online questionnaires (e-survey) or by profiling. The geocoding of establishments was carried out in cooperation with the business and enterprise register (BER) and the federal buildings and dwellings register (BDR).
The base data are encoded in accordance with the NOGA 2008 used for the 2008 survey. Subsequently, approx. 1500 variables on companies and jobs by full and part-time jobs and by NOGA (General Classification of Economic Activities) were aggregated into hectares or saved as a occurrence codes for GEOSTAT's standard product range.
Geodata from the federal business censuses of 1995/1996, 1998, 2000/2001 and 2005 are available in harmonised form according to the NOGA 2002. To make geodata from the BC 2008 comparable with geodata from previous business censuses, an additional analysis of the BC 2008 was made with the variable combinations of the harmonised geodata according to the NOGA 2002.
Business censuses of the industry and service sector 1995, 1998, 2001, 2005
The base data from the federal business censuses in the secondary and tertiary sectors of 1995, 1998 and 2001 were recoded and harmonised from the NOGA 1995 to the NOGA 2002 used for the 2005 survey. Subsequently, approx. 1000 variables on companies and jobs by full and part-time jobs and by NOGA (General Classification of Economic Activities) were aggregated into hectares or saved as a occurrence codes for GEOSTAT's standard product range.
Business censuses in the primary sector 1996, 2000, 2005
The business census in the primary sector is an exhaustive structural survey that includes all establishments and jobs in agriculture, forestry, hunting, fishing and fish farming. It provides results that can be compared with those of the second and tertiary sectors. Since 1996 the censuses have been coordinated with the farm structure survey and are used to update the business and enterprise register in the primary sector.
The base data from the business censuses of 1996 and 2000 in the primary economic sector were recoded from the NOGA 1995 to the NOGA 2002 and subsequently re-evaluated using the same variables as in the farm survey of 2005. The results from the primary sector censuses of 1996, 2000 and 2005 can, therefore, be compared with one another.
Land: Use, Cover, Suitability
The Swiss Land Use Statistics provides geocoded information on the state and evolution of land use and land cover in Switzerland since 1972. In addition, GEOSTAT offers downloadable data on the Forest composition in Switzerland and the Swiss Soil Suitability Map.
Swiss Land Use Statistics
The Swiss Land Use Statistic provides detailed and accurate information on the state and evolution of land use and land cover in Switzerland. On this page you will find the geodata of the Land Use Statistics at the hectare level since 1979, as well as documentation on the data and the methodology used to produce these data.
Geodata
Derivative and complementary data: The Land Use Statistics 1972
The Swiss Soil Suitability geodata provided by GEOSTAT are derived from the digitisation and consolidation of the soil
capability map of Switzerland at a scale of 1:200,000 published in 1980 by the Swiss Federal Offices for Spatial Planning, Agriculture and Forestry.
The Swiss Soil Suitability geodata were interpreted and mapped using numerous databases (maps, aerial photographs) from the 1970s at the Swiss Federal Research Station for Agriculture in Zurich-Reckenholz and digitised by the University of Bern. With the agreement of the publishers of the paper version, GEOSTAT combined the four map quadrants into a consolidated data set in 1994 and carried out a complete revision of these data in 2000. In particular, the geolocation of the data and the layout and shape of the vector boundaries were corrected based on a 1:200,000 pixel map. The data on lake boundaries and national borders, which are used as a basis for locating other routes, which have no direct physical connection with the ground, are taken from the (Vector200) file.
Map units
On the map, each map unit has a code consisting of a capital letter and a number. The capital letters represent 25 different
geological and geomorphological units. The letters are subdivided into various landscape elements, ordered by bedrock type, exposure and slope. Each map unit corresponds to one or more soil types. The 144 map units are divided on the map
into 18 groups of different colours, according to the suitability of the soil. This classification is mainly based on agricultural criteria.
Physio-geographical units of the Swiss Soil Suitability Map:
Categories of the land use statistics 1972
1: Wasteland
2: Rivers
3: Lakes
4: Forest
5: Pastures
6: Meadows, arable land, orchards
7: Vineyards
8: Settlements with high building density
9: Settlements with medium building density
10: Settlements with low building density
11: Transportation facilities
12: Industrial facilities
As the 1972 land use statistics was created on the basis of a very different survey methodology in relation to previous and subsequent land use surveys, and as it used its own classification with differently defined types of land use, a direct comparison and a description of trends over time is not recommended.
Derivative and complementary data: Forest composition in Switzerland
The geodata on the Forest composition in Switzerland classifies the hectares into different categories of deciduous, mixed and coniferous forest based on satellite data for the whole of Switzerland.
Within the project "Forest differentiation using digital satellite images", the FSO produced in 1996 two datasets covering the whole of Switzerland based on Landsat-TM satellite images. These two datasets cover the whole of Switzerland and divide the forest into the categories coniferous forest, predominantly coniferous forest, predominantly deciduous forest and deciduous forest.
This project has supplemented the Land Use Statistics for Switzerland with statistically reliable and geographically differentiated data on coniferous, deciduous and mixed forests. After geometric and radiometric correction of the satellite images, they were interpreted in two stages: the forest areas were separated from the non-forest areas and then divided into four degrees of mixedness.
Services for the population - accessibility
Adequate access to goods and services for daily needs, as well as access to recreation sites such as lakesides or forests, is of major importance for the quality of life. Measuring the accessibility of these services is one way to assess this phenomenon. To measure accessibility, the distance travelled on the road network between the place of residence and the location of the nearest service provider or recreation site is calculated.
Places of residence are not considered individually, but are aggregated by inhabited hectares. Populated hectares are defined according to the population and household statistics (STATPOP). The services are grouped into 35 categories and their data are taken from the structural business statistics (STATENT), the MAS structural data, the ARE geodata set 'ÖV-Güteklassen', the Swiss museum statistics and the swissTLM3D.
The distances between the populated hectares and the nearest settlement are calculated between the centre of each populated hectare and the metric coordinate of the respective service provider, using the road network of the swissTLM3D. The distance value is assigned to the hectare.
Geodata
Spatial divisions
To support the creation of thematic maps and the cartographic visualisation of statistical data, the FSO offers digital admistrative boundaries of the institutional subdivisions of Switzerland most relevant for statistics.
Generalized boundaries of local and regional authorities
The FSO provides annually updated digital communal boundaries for Switzerland since 1850 at various levels of generalization, based on the precise boundaries of the Directorate of Cadastral Surveying and the Federal Office of Topography. The datasets are particularly suitable for the visualization of statistical data from communes, districts and cantons as well as for the production of thematic maps at smaller scales.
Administrative boundaries with a low level of detail are often sought for thematic maps and illustrations. The annually updated, digital communal boundaries of Switzerland and the Principality of Liechtenstein produced by the Federal Office of Topography (swissBOUNDARIES3D) are often too detailed for this purpose.GEOSTAT therefore provides digital commune boundaries in two different generalizations: highly generalized (G4) for Swiss maps and moderately generalized (G1) optimized for regional maps. With the help of special algorithms and a manually supported and monitored optimization, the data is simplified so that it is suitable for maps and visualizations at scales of 1:200,000 and smaller. In addition to the various annual states of municipal boundaries since 1850, time series files are also available that integrate all states.
From 2017 onwards, these boundaries contain a data layer with boundaries of the «area with urban character» (agglomerations and core municipalities outside agglomerations) including communes of neighboring countries being part of a transnational agglomeration.
Geodata
Geographical key figures and analysis regions
Detailed geographical figures such as area and altitude of communes, districts, cantons and the country of Switzerland are available in the Swiss Communes application for all communal statuses since 1850. Information on individual values can be queried in a user-friendly manner. This application also provides data on spatial classifications (e.g. labour market or language regions), which can be linked to municipal boundaries using the historised commune number.
Geographische Kennzahlen - Suche (in German, French and Italian)
Municipal boundaries: time series since 1850
The SFSO provides digitized municipal boundaries of Switzerland from 1850 to 2015. From 2016 onwards, municipal boundaries will be available in swissBOUNDARIES3D from swisstopo.
The « Municipal boundaries: time series since 1850 » product from the SFSO provides municipal geometries for all municipal states between 01.01.1850 and 31.12.2015 for the entire territory of Switzerland and the Principality of Liechtenstein. For the period from 2016 to the present day, this time series is supplemented by the swissBOUNDARIES3D dataset published by swisstopo.
Administrative and geographical characteristics of municipalities
Information on the districts and cantons in which the municipalities are located, as well as their coordinates and altitude, is available in the dataset attribute table.
History of the municipalities
The history of municipal mutations is available on the Swiss Municipalities application (Applikation der Schweizer Gemeinden), and explanations of these mutations are provided in the document "Historical list of municipalities in Switzerland - Explanation and use" (Historisiertes Gemeindeverzeichnis der Schweiz - Erläuterungen und Anwendung).
Geodata
The 1850-2015 municipal boundary geometry datasets are provided in Shapefile, GeoPackage and GeoJSON formats. They are projected in the National Survey LV95. The datasets are available in the Geodata tab.
The description of the product and the variables supplied, as well as the production methodology, are available in the "Data description" and "Variables list" tabs.
Analysis regions
Analysis regions are contiguous spatial units that encompass a wide range of territorial divisions, including linguistic regions, mountain areas, labor market regions, and urban agglomerations. They support the creation of thematic maps and the analysis of territorial developments based on various regional boundaries.
Access to data
To view or download the map boundaries of the analysis regions in the Swiss Communes application, select a date between 1 January 1930 and the most recent update, choose an analysis region from the sptial divisions, specify a data format (GeoPackage, Shapefile, or GeoJSON), and indicate the desired level of detail for the geometries.
Geometrien der Raumgliederungen der Schweiz - Visualisierung und Download (only in German, French or Italian)
Supplementary information about analysis regions
Analysis regions
View or download data descriptions, methods, maps, additional data, and further information on the analysis regions.
Useful resources for mapping and spatial analysis
Infra-municipal statistical boundaries
The FSO provides digitized boundaries for infra-municipal areas as a basis for detailed spatio-temporal analyses. These are the boundaries of urban quarters of Swiss cities and the spatial statistical units (USPAT).
Boundaries of urban quarters of Swiss cities
With the project City Statistics (previously Urban Audit) the FSO publishes in collaboration with the most important Swiss cities 200 indicators about three different spatial units (agglomerations, core municipalities, and city quarters or neighborhoods). This serves as base information for comparisons on different aspects of living conditions in these cities. The infracommunal subdivisions used for this purpose are based on former city quarters which were surveyed with the population censuses of 1990 and 2000 and updated with data furnished by the concerned cities.
The outside boundaries of city quarters were adjusted to the 2024 edition of the communal boundaries (swissBOUNDARIES3D) and of shores of eventually adjoining lakes (swissTLM3D) to ensure data consistency and to enable combinations with other geodata.
The presently available geodata contain quarters from 11 Swiss cities. Hence, they do not replace completely the city quarters of 17 cities published in 2006 for the last time. These geodata remain accessible for holders of a geodata subscription, but they are no longer updated.
Spatial statistical units (USPAT)
The FSO has developed basic spatial statistical units (USPAT), which divide the Swiss territory into around 3 600 entities that can be grouped together along the boundaries of existing communes. They are designed to be stable over time, despite mergers of municipalities. The statistics produced at this level will enable a detailed analysis of the territory in both rural and urban areas. These small units are grouped together to provide a total of about 750 larger spatial units, each with around 10 000 inhabitants, to provide a more comprehensive range of statistics than at municipal level.
Topography
Information on FSO terrain data available as geodata. More than 30 years ago, on the basis of the RIMINI elevation model, the FSO derived grid data with a resolution of 100 m on Switzerland's altitude, aspect and slope inclination that could be used in geographic information systems and was, particularly in combination with other spatial data, suitable for statistical analyses.
The data basis for GEOSTAT's terrain data is the RIMINI terrain model, a matrix model with a spatial resolution of 250m, whose spatial coverage (especially in the extreme eastern part of Switzerland) was extended and some 30 years ago, interpolated to a resolution of 100 m. This GEOSTAT terrain model no longer meets all of today's requirements with regards to accuracy, but can occasionally still be useful for small-scale maps or for visualisation applications, as the amounts of data concerned are relatively small (in contrast to more precise terrain data with a higher resolution) and can be provided free of charge.
Unlike most other FSO geodata, this terrain model is not confined strictly to the boundaries of the Swiss national territory, but is determined by the coverage of the topographical maps which were used for the production of the RIMINI terrain model.
This topographical data is available through GEOSTAT as a text file including the following attributes:
- Coordinates
- Elevation (rounded to an accuracy of 1 m)
- Tripled standard error of elevation interpolation in meters (Sigma Höhe)
- Slope, inclination in gon (centesimal degrees with values from 0-100, insignificant values indicated by negative numbers)
- Exposition in gon (0-399)
- Clustered elevation: 35 elevation classes with intervals from 50 to 400 m
- Clustered inclination: 14 classes of 5 gon (centesimal degrees) each
- Clustered exposition: 10 classes (8 major compass directions or aspects, as well as "flat" and "undefined")
This content is not available in English. The German version is provided instead.